Оцените презентацию от 1 до 5 баллов!
Тип файла:
ppt / pptx (powerpoint)
Всего слайдов:
20 слайдов
Для класса:
1,2,3,4,5,6,7,8,9,10,11
Размер файла:
1.56 MB
Просмотров:
67
Скачиваний:
0
Автор:
неизвестен
Слайды и текст к этой презентации:
№1 слайд![LCD Video Wall User](/documents_6/960f569fbbe1fe9fadda67c2974abb41/img0.jpg)
Содержание слайда: LCD Video Wall User Instruction
№2 слайд![Function Function Full](/documents_6/960f569fbbe1fe9fadda67c2974abb41/img1.jpg)
Содержание слайда: Function :
Function :
• Full hardware architecture,Without CPU and Operation system;
• Start-upTime less than 6ms;
• No risk of virus infection,good safety;
• Integrated multi-channel video signal source types:Composite video, VGA, DVI, HDMI;
• Composite video can loop out;
• With USB updating interface, quick and simple update;
• Embedded 3D Video Light separation circuit unit
• Embedded 3D progressive normalization process and frame rate conversion circuit unit;
• Embedded 3D digital signal noise reduction unit;
• supports drive to 1920X1080 LCD screen;
• RS232 Serial Remote Control; each unit support 1ch in and 1ch out ;
• Can continue to work 24 hours a day;
• Easy operation with controller software
Features:
• Support Frame compensation function
Embedded Frame compensation function, can adjust all the picture to a window to display.
№3 слайд![Thermostatically controlled](/documents_6/960f569fbbe1fe9fadda67c2974abb41/img2.jpg)
Содержание слайда: • Thermostatically controlled fan
• Thermostatically controlled fan
Embedded Thermostatically controlled fan,can adjust the fan's
operation according to the actural temperature to make sure the long life of usage .
• Word-Editing Function
This special word-editing function,have single screen,splicing screen display,the Word size,
Color,Play speed、Play/Stop and etc.function can be changed acording to your application.
• Software updated automatically via USB
With a USB Interface,You can update the software via USB.Only save the updated software to
the USB and insert to the USB interface,After Re-AC,the controller will check the software
and updated automatically.
№4 слайд![System Connection X System](/documents_6/960f569fbbe1fe9fadda67c2974abb41/img3.jpg)
Содержание слайда: System Connection(2X2):
System Connection(2X2):
№5 слайд![Part Intergrated Controller](/documents_6/960f569fbbe1fe9fadda67c2974abb41/img4.jpg)
Содержание слайда: Part 2 : Intergrated Controller Interface
№6 слайд![Part Control Software](/documents_6/960f569fbbe1fe9fadda67c2974abb41/img5.jpg)
Содержание слайда: Part 3:Control Software Instruction
Software Operating Environment
Operation system: Windows 98/2000/ NT/XP/WIN7/ WIN8/WIN8.1/WIN10/Vista,
Minimum CPU:Pentium 133Mhz
RAM:128MB
Graphics Card:Standard VGA,More than 256 color display mode
Hard disk: 10M typical installation
Serial communication port:Standard RS232 communication interface or compatible models.
Other equipment: mouse
The steps of running the software :
1,Open the the power switch , the power LED is on :
Green color :system is on ; Orange :system is standby
2,Find the software , click LCD_CONTROL.exe , Software login window appears:
№7 слайд![,Software Interface](/documents_6/960f569fbbe1fe9fadda67c2974abb41/img6.jpg)
Содержание слайда: 3,Software Interface
№8 слайд![](/documents_6/960f569fbbe1fe9fadda67c2974abb41/img7.jpg)
№9 слайд![](/documents_6/960f569fbbe1fe9fadda67c2974abb41/img8.jpg)
№10 слайд![Interface Config Interface](/documents_6/960f569fbbe1fe9fadda67c2974abb41/img9.jpg)
Содержание слайда: Interface Config
Interface Config
Click " setting " -- "Interface "
1)User name:Set the title of operator interface name, you can change according to demand freedom
2)LCD unit:Select your screen splicing unit corresponding number,like 2x2,2x3,3x3 and etc.
3)Logo :Set the Log in picture ,you can change freedom
4)after setting, click "Enter"
№11 слайд![Matrix Setting Matrix Setting](/documents_6/960f569fbbe1fe9fadda67c2974abb41/img10.jpg)
Содержание слайда: Matrix Setting
Matrix Setting
Click " Setting" --" Matrix "
1)Accoring to the Original Matrix setting :AV Matrix 、VGA Matrix、DVI\HDMI Matrix
2)The matrix have to be compatible with our software protocal
3)Input channels, device address, command delay ,different set with different matrix command.
4)the matrix and monitor configuring relations can be changed when Configuring relations is manual
5)Linkage control、Rename matrix can be set freedom
№12 слайд![Splicing Operation Splicing](/documents_6/960f569fbbe1fe9fadda67c2974abb41/img11.jpg)
Содержание слайда: Splicing Operation
Splicing Operation
1、Make sure COM port already open,can check Status bar or shortcut function area
" open/close COM"
2、Make sure the signal type according to the inputed equipment signal origin
3、If have matrix , then you need to click the Matrix Linkage with √
4, Choose Splicing screen, take the following 6x6 video wall for example ,need to splice (2,2)-(4,4)
area to a 3x3 big screen displayed .
№13 слайд![](/documents_6/960f569fbbe1fe9fadda67c2974abb41/img12.jpg)
№14 слайд![Select the correct signal](/documents_6/960f569fbbe1fe9fadda67c2974abb41/img13.jpg)
Содержание слайда: 5、Select the correct signal input type and Matrix input channel , like: VIDEO,001_AV matrix input channel
5、Select the correct signal input type and Matrix input channel , like: VIDEO,001_AV matrix input channel
Click the singal origin "video ", then you will see the change accordingly
6、Clik" function " - " Splice" / " Single "
7、The system will be saved automatically for all your operation
№15 слайд![Other Function Other Function](/documents_6/960f569fbbe1fe9fadda67c2974abb41/img14.jpg)
Содержание слайда: Other Function
Other Function
• “ Function ”
1、Splice ,Single :Quick set the video wall status
2、Auto-adjust :On VGA Signal ,Auto adjust the image position,remove black-edged
3、Still-image:Can make the moving image static
4、Image-adjust:Only valid on the "Administrator " mode
№16 слайд![,Subtitle Function](/documents_6/960f569fbbe1fe9fadda67c2974abb41/img15.jpg)
Содержание слайда: (1),Subtitle Function (Word-editing)
(1),Subtitle Function (Word-editing)
① Select one line to be showed the words , take the first line for example (3x3)
②Click "subtitle" ,if shows failed, then check the cable damaged or not ,if successful ,
then go to next step
③Set word : size ,speed, color, position and etc.
④Click 'open", there will be belt light words appears
⑤Can set single screen to show the words, but the whole video wall only show one word
№17 слайд![Close-CommOn the case of the](/documents_6/960f569fbbe1fe9fadda67c2974abb41/img16.jpg)
Содержание слайда: ⑥、Close-Comm:On the case of the correct set of Com port ,can click this to open/close Com
⑥、Close-Comm:On the case of the correct set of Com port ,can click this to open/close Com
port quickly
⑦、Save Data: if the system cannot auto-save data, use this function to save
⑧、Version:show the version information on the buttom of the software
⑨、Power-on/Power-off:control the video wall standby or open/off situation
Screen Ext- Function
Click " Screen Ext-Function"
№18 слайд![Frame function Frame function](/documents_6/960f569fbbe1fe9fadda67c2974abb41/img17.jpg)
Содержание слайда: (2)Frame function
(2)Frame function
(3)Soft DIP Setting (Dial)
№19 слайд![When the product is faulty,](/documents_6/960f569fbbe1fe9fadda67c2974abb41/img18.jpg)
Содержание слайда: When the product is faulty, please turn off the power immediately,Please do not attempt to disassemble
the unit for repair ,this may cause further damage to the product .According to the following steps to
exclude .if still problem, pls contact us .It is not in our warranty area if the product is repaired by
users personally
№20 слайд![Work Temperature- - Work](/documents_6/960f569fbbe1fe9fadda67c2974abb41/img19.jpg)
Содержание слайда: Work Temperature:-15℃-65℃
Work Temperature:-15℃-65℃
Work Humidity:Relative humidity less than 95%
Power consumption:≤300W,Depends on the screen model and size
Supply Voltage:95V AC-250V AC
Composite video format:PAL、NTSC、SECAM
Composite Video Peak:1Vp-p
Control way:RS-232(RJ45)
VGA input:WUXGA(1920*1080)
DVI input :WUXGA(1920*1080)
Screen resolution support:WUXGA(1920*1080),Dual: 10bit
Thermostatically controlled fan:Automatic control